Calcium and other heavy minerals are not eliminated by da’Kappa. It is advisable to install some form of filtration system between the water meter and da’Kappa in areas that have high concentrations of scale or heavy metals. A filtration system must be used for all installations treating ground water.
da'Kappa 025
US$ 4,450.00
Length - 384 mm (15.12”)
Outer Diameter – 55 mm (2.17”)
Inlet Diameter – 25 mm (1”)
Gross Weight – 2.6 kg (5.73 lbs)
Casing - Stainless Steel
Accommodates Pipe Diameter up to 25 mm（1”)
Maximum Flow Rate – 50 liters/min (13.2 gallons/min)
Lifespan – 10 Year Warranty
The da'Kappa 025 is the most popular model and is most often used for:
Under sink installations
Single unit residences
Commercial Laundries
Industrial Cleaning
Food Processing
Bakeries
Beverage Production
Restaurants
Hair Dressers / Beauty Salons / Health Spas
Supermarkets
Cooling Towers
Horticulture (Soil, Hydroponics, Marine Products)
Livestock Industries
Fishery Farms
Dairy Farms
Water Treatment Facilities (Private and Governmental)
Private Clinics
da'Kappa 025
US$ 4,450.00
Length - 384 mm (15.12”)
Outer Diameter – 55 mm (2.17”)
Inlet Diameter – 25 mm (1”)
Gross Weight – 2.6 kg (5.73 lbs)
Casing - Stainless Steel
Accommodates Pipe Diameter up to 25 mm（1”)
Maximum Flow Rate – 50 liters/min (13.2 gallons/min)
Lifespan – 10 Year Warranty
The da'Kappa 025 is the most popular model and is most often used for:
Under sink installations
Single unit residences
Commercial Laundries
Industrial Cleaning
Food Processing
Bakeries
Beverage Production
Restaurants
Hair Dressers / Beauty Salons / Health Spas
Supermarkets
Cooling Towers
Horticulture (Soil, Hydroponics, Marine Products)
Livestock Industries
Fishery Farms
Dairy Farms
Water Treatment Facilities (Private and Governmental)
Private Clinics
da'Kappa 025 Installation
All installations should be carried out by or under the guidance of a qualified plumber.
Always install da’Kappa after the water meter.
Length - 384 mm (15.12”)
Outer Diameter – 55 mm (2.17”)
Inlet Diameter – 25 mm (1”)
Gross Weight – 2.6 kg (5.73 lbs)
Casing - Stainless Steel
Accommodates Pipe Diameter up to 25 mm（1”)
Material Requirements:
For all installations please use stainless steel or plastic sockets, bushings, unions or flanges (such as SUS/HIVP insert valve sockets). DO NOT use a copper coated cylinder or a coated joint. Use of brass is not recommended.
▶ Always check the flow direction before installation. The water flow direction is shown using a blue arrow.
▶ Please install the unit on or above the ground if possible.
▶ If the unit must be buried under ground, build a box and install it inside so that it can be taken out if necessary.
▶ When you connect to a 1/2 inch or 3/4 inch water pipe, adjust the diameter of the spout using a pushing or a nipple.
▶ Whether you install it on/above the ground or bury it under the ground, wrap the main body and joint sections with anticorrosive tape.
▶ When you install it on/above the ground, make sure to anchor the unit using some type of support.
▶ When you anchor on some type of support frame, wrap the main body and the joint sections with anticorrosive tape or some protective material so that the metal parts of the main body and those of the joint sections don't touch the support directly.
▶ Do not run water through the unit until the glue (if used) is completely dry.
▶ Protect against freezing in colder climates using insulation.
Click on the file below to download:
Installation Guide